Standard components

• Battery (lithium-ion), 96 V, battery capacity (gross) 14.1 kWh
• Battery charger On-board 3 kW, plug type 2, charger cable Schuko 230 V / 10 A
• Drive hydraulics motor (ECE R085) 33.1 kW
• Work hydraulics motor (ECE R085) 21.2 kW

• Hydraulic articulated pendulum steering, pendulum angle: ± 8°
• Steering cylinder: 1

• Operator's canopy with ROPS/FOPS-tested restraint system
• Generous provision of space in all operator's cabs
• Ergonomic, generous access
• Adjustable steering column (inclination and height)

• Fully damped comfort seat with safety belt, weight, back and height adjustment

• LED work lights, 2 front, 1 back on the operator’s canopy

• Axle: planetary axle PA940
• Drive system: electric drive, energy recuperation when decelerating, travel direction selectable on the joystick, Auto / Eco mode
• Battery: internal battery heater, charge time 20% to 80% SOC 2.9 hr, charge activation switch
• Speed: 15 km/h (optional 20 / 25)
• Speed levels: 2
• Operating brake: multi-disc brake on the front axle effective on the rear axle via the universal joint shaft
• Parking brake: electric parking brake with hill-hold function (the electric motor holds the machine when stopping on a hill)

• 10.0/75 - 15.3 AS ET40

• Lift arm lift height 3040 mm
• Quickhitch facility (Weidemann HV/HT - C) hydraulic
• Kinematics: P
• Lift cylinder: 2
• Tipping cylinder: 1
• Float position for lift and tipping cylinder

• Mechanically pilot controlled joystick with direction switch
• 3rd Front control circuit via lever with single detent for continuous function

• Cast rear weight

• EquipCare 36 months (incl. App & Manager)

• Fold-down operator's canopy eps ROPS / FOPS tested
• Cabin, 2 one-piece doors incl. heated windshields front and rear
• Cabin, 2 two-piece doors incl. heated windshields front and rear
• Front and rear windshield incl. wipers front and rear
• Faux leather seat; air-sprung (MSG 93)
• Faux leather seat; air-sprung; heated seat (MSG 93)
• Fabric seat (standard for the cabin) (MSG 83)
• Fabric seat; air-sprung  (MSG 93)
• Fabric seat; air-sprung; heated seat (MSG 93)
• Roof heating panel
• FM radio-ready (aerial, speaker)
• DAB+ radio-ready (aerial, speaker)
• Complete DAB+ radio
• Sunblind

• Lighting according to StVZO road regulations
• LED lighting according to StVZO road regulations
• LED Performance work lights (2000 lm) on roof, 2 front, 2 rear
• Rotating beacon-ready
• LED rotating beacon (yellow), National regulations must be maintained!
• Rotating beacon (yellow) with magnetic base,  the national regulations must be maintained!

• Individual operating permit < 25 km/h
• Number plate mounting front and rear
• Triangular warning sign

• Manual throttle

Axles

• Planetary axle PA940, electric all-wheel drive with lock,  transfer case, universal joint shaft, differential lock 100%

Travel speed

• 20 km/h (Speed increase)
• 25 km/h (Speed increase)

• 11.5/80-15.3 AS ET40 (tread AS, width 1,150 mm (turned 1,340 mm), height 2,364 mm)
• 31x15.50-15 AS ET0 Starco  (tread AS, width 1,320 mm, height 2,320 mm)
• 31x15.50-15 AS ET-37 Starco (tread AS, width 1,394 mm, height 2,320 mm)
• 15.0/55-17 AS ET0 (tread AS, width 1,310 mm, height 2,375 mm)
• 15.0/55-17 AS ET-40 (tread AS, width 1,400 mm, height 2,375 mm)
• 425/55 R 17 AS ET-40 Alliance 570 (tread AS, width 1,445 mm, height 2,375 mm)
• 31x15.50-15 EM ET0 (tread EM, width 1,340 mm, height 2,325 mm)
• 31x15.50-15 EM ET-37 (tread EM, width 1,414 mm, height 2,325 mm)
• 12-16.5 EM ET0 (tread EM, width 1,250 mm, height 2,341 mm)
• 425/40 B17 ET0 PR14 Delcora GSP+ (tread EM, width 1,365 mm, height 2,329 mm)
• 31x15.5-15 BKT TracMaster ET 0 (tread RP, width 1,345 mm, height 2,335 mm)
• 33x15.5-15 BKT TracMaster ET-37 (tread RP, width 1,424 mm, height 2,363 mm)
• 10-16.5 Sure Trax ET40 BKT (tread SureTrax, width 1,128 mm (turned 1,300 mm), height 2,323 mm)
• 12-16.5 Sure Trax ET45 BKT (tread SureTrax, width 1,175&# 160; (turned 1,370&# 160;), height 2,358 mm)
• 315/ 55R16 Conti MPT81 ET-30 (tread MPT, width 1,302 mm, height 2,305 mm)

• P-Kinematics LS921 lift height (3,200 mm)
• PZ-Kinematics LS937 lift height (3,200 mm)

Quick change plates

• Weidemann HV/HT - C - ECS (hydraulic - easy coupler system)
• Euro (hydraulic - ISO23206 EURO HV) (incl. two couplings SVK gr. 3)
• SkidSteer (hydraulic - SAEJ2513 SSL HV)
• SMS HV (hydraulic)
• Kramer HV/WL - C (hydraulic)

• Lowering brake valve (lift and tipping cylinder pipe breakage protection) incl. float position
• swing arm dampening
• bucket status indicator

• Oil volume adjustment of 3rd control circuit
• Additional hydraulic oil cooler
• Shell PANOLIN S4 HLP Synth 46 (Biohydraulic oil)
• Hydraulic oil - pre-warming

• 3rd control circuit proportional incl. continuous function via switch, pressure release 3rd control circuit front on the charging system, oil volume adjustment (operation: Via scroll wheel in front on the joystick)
• Pressureless return line in front (1 x Flatface size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)
• Quick coupling Faster 2-fold - machine side
• Quick coupling Faster 2-fold - machine side + attachment side

• Dual-acting, rear, hydraulic connection via switch valve (two couplings SVK gr. 3), (3rd control circuit front or rear), operation: Via switch (0 - 1) + 3rd control circuit
• Rear depressurized return line (1x SVK gr. 3 plug) incl. overflow oil line (1x flatface gr. 2 plug)

• Lithium-ion battery 18.0 kWh 96V
• Lithium-ion battery 28.0 kWh 96V
• On-board charger up to 6 kW (AC)

Charger cable (on the machine, type 2, multiple selection available)

• Protective contact mains plug (SchuKo) 230V/10A (is pre-selected, can be deselected is no charging cable or another charging cable is required)
• CEE, 3-pole 230V/16A (blue)
• CEE, 5-pole 400V/16A (red)
• Type 2 (IEC 62196)
• Adapter set EU (Schuko, CEE 3-pole, CEE 5-pole)

Battery charge level release

• Charge release lockable

front

• Socket front, 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Using 2 keys on the joysticks; 1st function tentative, 2nd function resting
• Socket front, 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Using 2 keys on the joysticks; 1st function tentative, 2nd function resting
• Socket front, 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Using 2 keys on the joysticks; 1st function tentative, 2nd function resting
• Socket front, 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Using 2 keys on the joysticks; 1st function tentative, 2nd function resting

rear

• Socket rear, 3-pole, (2x electrical functions E3/ E4, can be switched over to front socket), operation: Via switch; 1st function tentative, 2nd function resting
• Rear socket 7-pole for lighting rear attachments

• Reverse alarm (acoustic)
• Blue safety light, rear
• Immobilizer KAT, operation: via coded ignition key

• Special painting RAL single color - instead of Weidemann red
• Special painting RAL multicolored

• Floor plate counterweight (100 kg)
• Toolbox, including tool set and hand lever grease press
• Combination box (for combination envelope)
• Combination bag (warning triangle / first aid kit)
• Fully automatic central lubrication unit

• Trailer hitch ball head K50
• Trailer hitch automatic

• Trailer hitch automatic