Standard components

• Deutz TCD 2.9 L4 S5, 55.4 kW/ 75 hp, stage V

Axle PA1400, 6-hole

• 12.5/80-18 AS ET75, profile AS, width 1580 mm

Axle PA1422, 8-hole

• 12.5-20 MPT ET0, profile MPT, width 1750 mm

• Hydraulic articulated pendulum steering, pendulum angle ± 12°
• Steering cylinder: 1

• Axle PA1400
• 20 km/h
• Hydrostatic all-wheel drive, driving direction selectable via joystick
• Service brake: Hydrostatic drive acting on all 4 wheels (wear-free)
• Central service and parking brake in drive train acting on all 4 wheels
• Differential lock 100 %, electric-hydraulic switchable on front and rear axle

• 3rd Front control circuit electrically proportional parallel via joystick, incl. double detent; hydraulic oil cooler
• Float position for lifting cylinder

• Comfort cab with heating and ventilation, laterally tiltable, ROPS / FOPS tested
• Comfort seat with seat belt full suspension, weight, back and longitudinal adjustment (MSG 85)
• Hydraulically pre-controlled joystick with direction switch and integrated push button for differential lock
• Worklights 2 front and 2 rear
• Operating hours meter
• Fuel gauge
• Adjustable steering wheel

• Lighting system according to StVZO
• Bucket level indicator
• Self-recovery coupling

• Weidemann hydraulic

• EquipCare 36 months (incl. App & Manager)

• Self-recovery coupling (Not approved for trailer operation!)

• 2-door, comfort cabin, high
• Storage box with bottle holder (left next to the operator’s seat)
• Radio DAB+-ready (aerial, speaker)
• Radio DAB+ complete
• Air-conditioning system
• Front window protective grating
• Cabin outlet 230 V (connection power max. 2000 W), (Only works with connected engine pre-heating on the 230 V grid)

• Fabric seat; heated seats (MSG 85)
• Fabric seat; air suspension (MSG 95AL/722)
• Fabric seat; air suspension; heated seats (MSG 95AL/732)

• LED work lights, 2 in front, 2 in rear
• Rotating beacon (yellow) (National regulations must be observed!)

• Individual operating permit > 25 km/h
• Individual operating permit > 25 km/h
• Registration plate mounting

• Manual throttle
• Engine pre-heating (coolant) + hydraulic oil pre-heating 230 V

• Axle PA1422, hydrostatic high-pressure all-wheel drive, 20 km/h (30 km/h) (transfer case, universal joint shaft, 100% differential lock)
• 30 km/h (Speed increase)
• Hand inching (low-speed control)
• Dirt trap in front (attached to the mud guard)

Axle PA1400, 6-hole

• 425/55 R 17 AS ET45, tread AS, width 1740 mm
• 400/70-20 AS ET0 AS504, tread AS, width 1820 mm
• 500/45-20 AS ET0, tread AS, width 1900 mm
• 15.5/55 R 18 EM ET60, tread EM, width 1690 mm
• 405/70 R 18 EM Alliance 608 ET0, tread EM, width 1800 mm
• 405/70 R 20 EM Alliance 608 ET0, tread EM, width 1807 mm
• 12.5-18 MPT ET0, tread MPT, width 1730 mm

• 400/70 R 18 ET-15 Michelin Bibload, tread Bibload, width 1852 mm

Axle PA1422, 8-hole

• 400/70-20 AS ET0 AS504, tread AS, width 1840 mm
• 400/70-20 ET-50 AS504, tread AS, width 1930 mm
• 500/45-20 AS ET0, tread AS, width 1920 mm
• 550/45-22.5 AS ET0, tread AS, width 1990 mm
• 550/45-22.5 AS ET-50, tread AS, width 2080 mm
• 15.5/55 R 18 EM ET0, tread EM, width 1780 mm
• 405/70 R 18 EM Alliance 608 ET0, tread EM, width 1815 mm
• 405/70 R 20 EM Alliance 608 ET0, tread EM, width 1829 mm
• Dual tires 12.5-18 MPT front, tread MPT, width
• 340/80 R 18 ET0 Alliance Multiuse 550, tread Multiuse, width 1770 mm
• 400/70 R 20 ET0 Alliance Multiuse 550, tread Multiuse, width 1800 mm
• 400/70 R 20 ET-60 Alliance Multiuse 550, tread Multiuse, width 1930 mm
• 400/70 R 20 ET-50 Michelin Bibload, tread Bibload, width 1944 mm 

• Water filling valves without filling (front wheels)
• Water filling valves without filling (rear wheels)
• Water filling valves without filling (front and rear wheels)
• Water filling valves with filling (front wheels)
• Water filling valves with filling (rear wheels)
• Water filling valves with filling (front and rear wheels)

• Loading swing arm damping
• Lowering brake valve (hose burst valves for lift and tipping cylinders)

• Euro hydraulic
• SkidSteer hydraulic
• SMS hydraulic

• Front pressureless return (incl. leakage oil line)
• Working hydraulics (83 l/min) Large pump 36 cm
• Working hydraulics (103 l/min) Large pump 45 cm
• High flow - power hydraulics single-acting (115 l/min), (incl. pressureless return and additional hydraulic oil cooler)
• 3rd Control circuit electrically proportional serial (loading swing arm can be operated together with 3rd Control circuit)
• 4th Additional control circuit electrically proportional parallel
• Operation: Via control wheel on the right of the joystick
• Additional hydraulic oil cooler

• Pressureless return in rear
• One hydraulic connection rear double-acting via changeover valve (l/min like 3rd Control circuit front), (3rd Control circuit front or rear), (Operation: Via switch (0 - 1) in joystick console + 3rd control circuit)
• One rear hydraulic connection (51 l/min) double-acting (two couplings) incl. separate control valve (Operation: Via switch (1 - 0 - 2) in joystick console)
• Two hydraulic connections at the rear (51 l/min) double-acting (four couplings) incl. separate control valve
• Operation: 1 DW connection via switch (1 - 0 - 2), 1 DW connection via pushbutton (1 - 0 - 2)
• (connections can be operated simultaneously)

• Shell PANOLIN S4 HLP Synth 46 (Bio-hydraulic oil)

• Front socket 7-pin for lighting front attachments
• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function latching)
• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function push-button)
• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function push-button, 2nd Function push-button)
• Front socket 3-pin for double function (operation: Via 2 buttons on the joystick; 1st Function latching, 2nd Function latching)

• Rear 7-pin socket for lighting rear attachments
• Rear 3-pin socket (operation: Via switch (1 - 0 - 2) in joystick console)

• Reversing warning device (acoustic)
• Immobilizer (operation via coded ignition key)

• Battery disconnect switch 2 circuits (disconnection of the on-board power supply and the generator via 2 switching paths from the battery)
• Hand lever grease press
• Combination bag (warning triangle / first aid kit)
• Set of tools
• Tool box
• Fully automatic central lubrication unit

Warranty extension*

• Economy 24 months (2500 h)
• Economy 36 months (3000 h)
• Economy 48 months (3500 h)
• Economy 60 months (4000 h)
• Premium 24 months (3000 h)
• Premium 36 months (4000 h)
• Premium 48 months (5000 h)
• Premium 60 months (6000 h)

*The offers regarding the warranty extension in Germany are currently being revised - more information will follow as quickly as possible.

• Special painting RAL single color - instead of Weidemann red
• Special painting RAL multicolored

• Trailer hitch automatic

• Trailer hitch automatic