Thank you
Your request has been sent successfully
T4512e
| Battery technology | Lithium-ion |
| Battery voltage class | 96 V |
| Battery capacity | 18.0 kWh |
| Battery weight | 186 kg |
| On-board charging capacity (max.) | 6 kW |
| Loading time (0-100%) | 3,2 - 7,5* h |
| Loading time (20-80%) | 1,8* h |
| Running time up to | 3,1** h |
| Battery technology | Lithium-ion |
| Battery voltage class | 96 V |
| Battery capacity | 28.0 kWh |
| Battery weight | 244 kg |
| On-board charging capacity (max.) | 6 kW |
| Loading time (0-100%) | 5,5 - 11,5* h |
| Loading time (20-80%) | 2,7* h |
| Running time up to | 5,2** h |
| Motor traction drive (ECE R085) | 33,1 kW |
| Motor work hydraulics (ECE R085) | 21.2 kW |
| Operating voltage | 12 V |
| Payload (max.) | 1,250 kg |
| Operating weight | 2,750 - 3,100 kg |
| Driver's cab | Cab |
| Tank capacity for hydraulic oil | 36 l |
| Type of drive | Electrical |
| Drive unit | universal joint shaft |
| Speed levels | 2 |
| Axle | PAL1165 |
| Travel speed Standard | 0-15 km/h |
| Travel speed Option 1 | 0-20 km/h |
| Travel speed Option 2 | 0-25 km/h |
| Operating brake | Hydraulically operated disc brake |
| Parking brake | Electric parking brake with hill-hold function |
| Differential lock | 100% VA + HA (option) |
| Work hydraulics discharge volume (max.) | 41,6 l/min |
| Work hydraulics working pressure (max.) | 220 bar |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | Mechanical (hydraulically activated) |
| Steering type | Hydrostatic all-wheel steering with end position synchronization |
| Steering cylinder | 2 |
| Steering angle max. | 2x38 degree |
| Oscillating angle of the rear axle | ± 7 degree |
| Average sound power level LwA (cabin) | 85.7 dB(A) |
| Guaranteed sound power level LwA (cabin) | 87 dB(A) |
| Specified sound pressure level LpA (cabin) | 73 dB(A) |
|
*The actual battery charging time depends on various factors, in particular the available charging infrastructure, the charging power, the connector used, the ambient temperature, and the condition and temperature of the battery. A limited power supply, unfavorable environmental conditions, or reduced charging power may extend the charging time. The values provided are based on defined test and charging conditions. Variations are possible. Onboard charger 3 kW (standard), with an additional onboard charger for a total of 6 kW (optional). The following charging connectors are available: 230 V / 10 A Schuko, 400 V / 16 A (Type 2 wallbox plug, IEC 62196), and an adapter set with a 230 V / 16 A CEE plug, a 400 V / 16 A CEE plug, and a 230 V / 16 A Schuko plug. **The actual battery runtime depends on operating conditions, the task at hand, operating and driving habits, and other factors such as ambient temperature or battery condition. Operating under heavy loads or at low temperatures can shorten the runtime. The values provided are based on defined, real-world test conditions and are intended as a guide. Deviations may occur in actual use. |
|
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
