Thank you
Your request has been sent successfully
| Engine manufacturer | Yanmar |
| Motor type | 3TNV80FT |
| Cylinder | 3 |
| Drive output | 18.4 kW |
| Drive output | 25 PS |
| At max. rpm | 2,600 U/min |
| Cylinder capacity | 1,226 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | - |
| Average sound power level LwA (cabin) | 93.5 dB(A) |
| Guaranteed sound power level LwA (cabin) | 94 dB(A) |
| Specified sound pressure level LpA (cabin) | 78 dB(A) |
| Engine manufacturer | Yanmar |
| Motor type | 3TNV86CHT |
| Cylinder | 3 |
| Drive output | 33.3 kW |
| Drive output | 45.3 PS |
| At max. rpm | 2,600 U/min |
| Cylinder capacity | 1,568 cm³ |
| Type of coolant | Water |
| Exhaust standard level | V |
| Exhaust aftertreatment | DOC/DPF |
| Average sound power level LwA (cabin) | 94.1 dB(A) |
| Guaranteed sound power level LwA (cabin) | 95 dB(A) |
| Specified sound pressure level LpA (cabin) | 78 dB(A) |
| Operating voltage | 12 V |
| Battery | 77 Ah |
| Alternator | 80 A |
| Payload (max.) | 1,250 kg |
| Operating weight | 2,750 - 2,900 kg |
| Driver's cab | Cab |
| Tank capacity for fuel | 33 l |
| Tank capacity for hydraulic oil | 36 l |
| Type of drive | ecDrive (Electronic Controlled Drive) |
| Drive unit | hydrostatic via transfer case and cardan shaft |
| Speed levels | 2 |
| Axle | PAL 1155 |
| Travel speed Standard | 0-20 km/h |
| Travel speed Option 1 | 0-30 km/h |
| Operating brake | Hydraulically actuated disc brake on front axle acting on rear axle via cardan shaft |
| Parking brake | Electro-hydraulic spring-loaded brake on front axle, acting on rear axle via cardan shaft |
| Differential lock | 100% front axle rear axle |
| Drive hydraulics working pressure (max.) | 380 bar |
| Work hydraulics discharge volume (max.) | 36,4 (41,6-70) l/min |
| Work hydraulics working pressure (max.) | 220 bar |
| Lifting cylinder | 1 |
| Tipping cylinder | 1 |
| Quick change system | mechanical (hydraulic) |
| Steering type | Hydraulic all-wheel steering with end position synchronization |
| Steering cylinder | 2 |
| Steering angle max. | 2x38 degree |
| Oscillating angle of the rear axle | ± 7 degree |
|
DPF = Diesel Particulate Filter DOC = Diesel oxidation catalyst SCR = Selective Catalytic Reduction |
|
When the loader is used in accordance with the intended purpose, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. In doing so, the actual application conditions are to be taken into consideration.
Telehandlers, like wheel loaders, are to be classified by operating weight.
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole-body vibrations: This machine is equipped with an operator’s seat that meets the requirements of EN ISO 7096:2000.
| Type of loader | Typical operating conditions | Mean value [m/s2] | Standard deviation (s) in [m/s2] | ||||||
|
| ||||||||
| Compact wheel loader (operating weight < 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Wheel loader (operating weight > 4500 kg) | Load & carry (load and transport work) |
|
| ||||||
| Application in extraction (harsh application conditions) |
|
| |||||||
| Delivery drive |
|
| |||||||
| V-operation |
|
|
